DrumQuik PRO valved elbow coupler, 3/4" (19 mm) hose barb, polypropylene, EPDM, 316 stainless spring - CPC DQPRO120312

DQPRO120312 is the hose-connected variant: instead of a thread it carries a barb for 19 mm (3/4") tubing. It mounts on the drum insert and routes the fluid at an angle into the hose. CPC lists a pressure range of 0 to 3.1 bar and a temperature range of 0 to 49 °C.

Applications

• Flexible hose run from the container to the pump or filling point
• Closed chemical extraction from drums, jerry cans and IBC totes
• Changing dispensing spots where a hose is easier to route than rigid pipe

Benefits

• Direct hose connection: barb for 3/4" (19 mm) tubing, no thread adapter needed.
• Larger connection: 3/4" (19 mm) rather than the 1/2" of the NPT couplers in the series.
• Valved: 316 stainless valve spring and EPDM seals.
• Made for closed handling: CPC cites fewer spills and contained fumes.

Packing unit

Packing unit: 5 pcs. Price per piece, ordered in steps of 5 pcs.

Datasheet

The DrumQuik PRO series datasheet is available under Downloads.