DrumQuik PRO valved elbow coupler with FKM O-rings, 1/2 NPT male thread, polypropylene, 316 stainless spring - CPC DQPRO120208202

DQPRO120208202 is meant for chemicals where EPDM is ruled out. It shares the layout of the 1/2 inch DrumQuik PRO coupler but carries FKM O-rings. The polypropylene body, the 316 stainless valve spring and the rating of 0 to 3.1 bar at 0 to 49 °C stay the same.

Applications

• Closed chemical extraction from drums, jerry cans and IBC totes
• Fluids whose compatibility check points to FKM as the seal material
• Pump connection with a 1/2 NPT thread, metering pumps included

Benefits

• Seal matched to the fluid: FKM O-rings in place of EPDM, otherwise identical to the base model.
• Less exposure to fumes: according to CPC the closed system keeps hazardous vapors inside the container.
• Valved design: shut-off valve with a 316 stainless steel spring.
• Tight threaded joint: 1/2 NPT male thread for hard piping to the pump.
• Clear operating window: 0 to 3.1 bar, 0 to 49 °C.

Packing unit

Packing unit: 5 pcs. Price per piece, ordered in steps of 5 pcs.

Datasheet

The DrumQuik PRO series datasheet is available under Downloads.