Elbow flow control valve with check function, exhaust air control (standard), M 5, tube 4 mm

This elbow flow control valve with check function sets the flow volume in a compressed air line. The version is exhaust air control (standard). The connection is M 5. The materials are body Nickel-plated brass / PA 66, release ring PA 66, seal NBR, retaining claws stainless steel, cartridge ZnDC zinc-plated. The operating pressure is stated as -0.95 bar.

Advantages

• Temperature range of -20 to +80 °C, suitable for production environments with changing load.
• Media Compressed air, neutral gases, the valve needs no separate treatment.
• Version exhaust air control (standard), so the speed is limited on the correct side of the piston.
• Push-in connector for tube with 4 mm outside diameter, release works without tools through the release ring.
• Connection thread M 5 for screwing directly into the cylinder end cap.

Applications

• Screwing directly into cylinder end caps with thread M 5.
• Avoiding the stick-slip effect on slow running actuators.
• Matching forward and return stroke in cycled handling devices.
• Production environments within the temperature range -20 to +80 °C.