Weld-on tube fitting, elbow design, tube 25 S (M36x2), weld nipple 31 mm, stainless steel 1.4571

The operating pressure reaches up to 400 bar. The weld-on tube fitting connects a tube 25 S (M36x2) and a weld nipple of 31 mm outside diameter in doing so. The elbow design turns the line by 90 degrees and saves installation length.

Benefits

• The heavy series with the code S follows the dimension series to ISO 8434-1
• The change of direction by 90 degrees saves installation length ahead of the port
• The weld nipple has a wall thickness of 5.5 mm and can be welded all round
• The cutting ring bites into the tube wall and holds the tube even under pressure surges
• With tube connection 25 S (M36x2) the size is fixed, so no reworking of the line is required

Applications

Hydraulic lines in machine and plant engineering, pipework on presses and pumps, repair of existing tube fittings, test benches and power unit construction.

Standards and conformity

The tube fitting follows the design of cutting ring tube fittings to ISO 8434-1, formerly DIN 2353.