Weld-on tube fitting, elbow design, tube 22 L (M30x2), weld nipple 27 mm, phosphated steel

This weld-on tube fitting joins a tube 22 L (M30x2) and a weld nipple of 27 mm outside diameter in one part. The operating pressure reaches up to 160 bar. The elbow design turns the line by 90 degrees and saves installation length.

Benefits

• The change of direction by 90 degrees saves installation length ahead of the port
• The weld nipple has a wall thickness of 4.0 mm and can be welded all round
• The cutting ring bites into the tube wall and holds the tube even under pressure surges
• With tube connection 22 L (M30x2) the size is fixed, so no reworking of the line is required
• The operating pressure up to 160 bar is released for this size
• The temperature range from -40 °C to +120 °C covers cold installation and warm machine surroundings

Applications

Pipework on presses and pumps, repair of existing tube fittings, test benches and power unit construction, hydraulic lines in machine and plant engineering.

Standards and conformity

The tube fitting follows the design of cutting ring tube fittings to ISO 8434-1, formerly DIN 2353.