Weld-on tube fitting, elbow design, tube 20 S (M30x2), weld nipple 26 mm, stainless steel 1.4571

The weld-on tube fitting accepts a tube 20 S (M30x2) and a weld nipple of 26 mm outside diameter. The part clamps the cutting ring onto the tube and seals metal to metal. The operating pressure reaches up to 400 bar. The elbow design turns the line by 90 degrees and saves installation length.

Benefits

• The material stainless steel 1.4571 stays resistant without additional coating in the range from -60 °C to +400 °C
• The heavy series with the code S follows the dimension series to ISO 8434-1
• The change of direction by 90 degrees saves installation length ahead of the port
• The weld nipple has a wall thickness of 5.0 mm and can be welded all round

Technical data

Applications

Test benches and power unit construction, hydraulic lines in machine and plant engineering, pipework on presses and pumps, repair of existing tube fittings.

Standards and conformity

The tube fitting follows the design of cutting ring tube fittings to ISO 8434-1, formerly DIN 2353.