Weld-on tube fitting, elbow design, tube 18 L (M26x1.5), phosphated steel

This weld-on tube fitting joins a tube 18 L (M26x1.5) and a weld nipple of 22 mm outside diameter in one part. The operating pressure reaches up to 315 bar. The elbow design turns the line by 90 degrees and saves installation length.

Benefits

• The change of direction by 90 degrees saves installation length ahead of the port
• The weld nipple has a wall thickness of 3.5 mm and can be welded all round
• The cutting ring bites into the tube wall and holds the tube even under pressure surges
• With tube connection 18 L (M26x1.5) the size is fixed, so no reworking of the line is required
• The operating pressure up to 315 bar is released for this size
• The temperature range from -40 °C to +120 °C covers cold installation and warm machine surroundings

Applications

Pipework on presses and pumps, repair of existing tube fittings, test benches and power unit construction, hydraulic lines in machine and plant engineering.

Standards and conformity

The tube fitting follows the design of cutting ring tube fittings to ISO 8434-1, formerly DIN 2353.