Images are examples, some edited with AI. The technical data are authoritative. AI notice
FRL service unit 2-part, G1/4, 0.5-10 bar, with gauge, automatic drain NO, bowl guard - Airtec FROX-14-10-5-4321
Filter regulator with downstream lubricator for G1/4 lines, outlet pressure 0.5-10 bar, X series, size X1. Flow up to 1200 Nl/min, automatic drain NO, with pressure gauge. Inlet pressure 1.5 to 16 bar, oil and condensate bowls made of PC with guard.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The Airtec FROX-14-10-5-4321 is a two-part service unit made up of filter regulator and lubricator. The filter regulator removes particles and condensate with a 5 µm filter and holds the outlet pressure within 0.5-10 bar. The downstream lubricator adds oil to the air stream from a flow of 75 Nl/min.
Benefits
- Three stages in one assembly: 5 µm filter, pressure regulator and lubricator.
- Lubrication from 75 Nl/min: the lubricator responds even at low flow rates.
- Automatic condensate drain empties the bowl without operator action.
- Hazardous areas: no inherent potential ignition source with reference to Directive 2014/34/EU, usable in zones 1, 2, 21 and 22 subject to the local requirements.
Applications
Air preparation for pneumatic actuators and tools that need filtered, lubricated air at constant pressure.
Technical data
| Feature | Value |
|---|---|
| Type | service unit, 2-part: filter regulator and lubricator |
| Series / size | X / X1 |
| Port | G1/4 |
| Regulating range | 0.5-10 bar |
| Filtration | 5 µm |
| Flow | 1200 Nl/min |
| Lubricator response threshold | 75 Nl/min |
| Inlet pressure | 1.5 to 16 bar |
| Oil and condensate bowls | PC with guard |
| Condensate bowl volume | 25 cm³ |
| Oil bowl volume | 50 cm³ |
| Condensate drain | automatic, NO (open at 0 bar inlet pressure) |
| Pressure indication | with pressure gauge |
| Flow direction | left to right |
| Handwheel | standard |
| Mounting position | vertical, drain valve at the bottom |
| Temperature range | -10 to +60 °C |
| Medium | compressed air to ISO 8573-1:2010, neutral gases |
| Body | zinc die-cast |
| Seals | NBR |
| Internal parts | galvanised steel, stainless steel, brass |
| Manufacturer | Airtec |
| Hersteller-Nr | FROX-14-10-5-4321 |
| GPSR Herstellerdaten | AIRTEC Pneumatic GmbH, Westerbachstraße 7, DE-61476 Kronberg, www.airtec.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | mit Manometer, Durchfluss von links nach rechts |
| Bauform | Baugröße X1 |
| Behälterausführung | PC mit Schutzkorb |
| Anschlussgröße | G1/4 |
| Thread | G 1/4 |
| Housing material | Die-cast zinc |
| Flow rate [l/min] | 1200 |
| Druckregelbereich [bar] | 0,5 - 10 |
| Dichtungen | NBR |
| Series | FROX |
| Betriebsdruck max [bar] | 16 |
| Temperaturbereich | -10-60 °C |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.



