Images are examples, some edited with AI. The technical data are authoritative. AI notice
Service unit filter regulator-lubricator, G3/4, 0.5-10 bar, without gauge, automatic drain NO - Airtec FROX-34-10-5-1301
The service unit FROX combines a filter regulator with 5 µm filter and a lubricator in one assembly, G3/4 port, 0.5-10 bar regulating range. Flow up to 5250 Nl/min, automatic drain NO, without pressure gauge. Inlet pressure 1.5 to 16 bar, oil and condensate bowls made of PC.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The Airtec FROX-34-10-5-1301 supplies consumers with filtered, pressure-regulated and lubricated air from one assembly. The filter regulator removes particles and condensate with a 5 µm filter and holds the outlet pressure within 0.5-10 bar. The downstream lubricator adds oil to the air stream from a flow of 170 Nl/min.
Benefits
- Three stages in one assembly: 5 µm filter, pressure regulator and lubricator.
- Lubrication from 170 Nl/min: the lubricator responds even at low flow rates.
- Automatic condensate drain empties the bowl without operator action.
- Hazardous areas: no inherent potential ignition source with reference to Directive 2014/34/EU, usable in zones 1, 2, 21 and 22 subject to the local requirements.
Applications
Machines and systems where filtering, pressure setting and lubrication are to sit in one compact unit at the inlet.
Technical data
| Feature | Value |
|---|---|
| Type | service unit, 2-part: filter regulator and lubricator |
| Series / size | X / X2 |
| Port | G3/4 |
| Regulating range | 0.5-10 bar |
| Filtration | 5 µm |
| Flow | 5250 Nl/min |
| Lubricator response threshold | 170 Nl/min |
| Inlet pressure | 1.5 to 16 bar |
| Oil and condensate bowls | PC |
| Condensate bowl volume | 50 cm³ |
| Oil bowl volume | 125 cm³ |
| Condensate drain | automatic, NO (open at 0 bar inlet pressure) |
| Pressure indication | without pressure gauge |
| Flow direction | left to right |
| Handwheel | standard |
| Mounting position | vertical, drain valve at the bottom |
| Temperature range | -10 to +60 °C |
| Medium | compressed air to ISO 8573-1:2010, neutral gases |
| Body | zinc die-cast |
| Seals | NBR |
| Internal parts | galvanised steel, stainless steel, brass |
| Manufacturer | Airtec |
| Hersteller-Nr | FROX-34-10-5-1301 |
| GPSR Herstellerdaten | AIRTEC Pneumatic GmbH, Westerbachstraße 7, DE-61476 Kronberg, www.airtec.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | ohne Manometer, Durchfluss von links nach rechts |
| Bauform | Baugröße X2 |
| Behälterausführung | PC |
| Anschlussgröße | G3/4 |
| Thread | G 3/4 |
| Housing material | Die-cast zinc |
| Flow rate [l/min] | 5250 |
| Druckregelbereich [bar] | 0,5 - 10 |
| Dichtungen | NBR |
| Series | FROX |
| Betriebsdruck max [bar] | 16 |
| Temperaturbereich | -10-60 °C |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.


