Images are examples, some edited with AI. The technical data are authoritative. AI notice
Service unit filter regulator-lubricator, G1/4, size Y1, 0.5-8 bar, without gauge - Airtec FROY-14-08-5-1201
Filter regulator with downstream lubricator for G1/4 lines, outlet pressure 0.5-8 bar, Y series, size Y1. Flow up to 1800 Nl/min, semi-automatic drain, without pressure gauge. Inlet pressure 1.5 to 16 bar, oil and condensate bowls made of PC with PA guard.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The Airtec FROY-14-08-5-1201 is a two-part service unit made up of filter regulator and lubricator. The filter regulator removes particles and condensate with a 5 µm filter and holds the outlet pressure within 0.5-8 bar. The downstream lubricator adds oil to the air stream from a flow of 100 Nl/min. The handwheel locks when pressed down and, after unscrewing 2 lock hooks, can be secured with padlocks.
Benefits
- Three stages in one assembly: 5 µm filter, pressure regulator and lubricator.
- Lubrication from 100 Nl/min: the lubricator responds even at low flow rates.
- Tamper-proof setting: handwheel locks when pressed down and can be padlocked.
- Hazardous areas: no inherent potential ignition source with reference to Directive 2014/34/EU, usable in zones 1, 2, 21 and 22 subject to the local requirements.
Applications
Air preparation for pneumatic actuators and tools that need filtered, lubricated air at constant pressure.
Technical data
| Feature | Value |
|---|---|
| Type | service unit, 2-part: filter regulator and lubricator |
| Series / size | Y / Y1 |
| Port | G1/4 |
| Regulating range | 0.5-8 bar |
| Filtration | 5 µm |
| Flow | 1800 Nl/min |
| Lubricator response threshold | 100 Nl/min |
| Inlet pressure | 1.5 to 16 bar |
| Oil and condensate bowls | PC with PA guard |
| Condensate bowl volume | 28 cm³ |
| Oil bowl volume | 40 cm³ |
| Condensate drain | semi-automatic |
| Pressure indication | without pressure gauge |
| Flow direction | left to right |
| Handwheel | locking, can be padlocked |
| Mounting position | vertical, drain valve at the bottom |
| Temperature range | -10 to +50 °C |
| Medium | compressed air to ISO 8573-1:2010, neutral gases |
| Body | Grivory (PA66) and POM |
| Seals | NBR |
| Internal parts | galvanised steel, stainless steel, brass |
| Manufacturer | Airtec |
| Hersteller-Nr | FROY-14-08-5-1201 |
| GPSR Herstellerdaten | AIRTEC Pneumatic GmbH, Westerbachstraße 7, DE-61476 Kronberg, www.airtec.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | ohne Manometer, Durchfluss von links nach rechts |
| Bauform | Baugröße Y1 |
| Behälterausführung | PC mit PA-Schutzkorb |
| Anschlussgröße | G1/4 |
| Thread | G 1/4 |
| Housing material | Grivory (PA66) und POM |
| Flow rate [l/min] | 1800 |
| Druckregelbereich [bar] | 0,5 - 8 |
| Dichtungen | NBR |
| Series | FROY |
| Betriebsdruck max [bar] | 16 |
| Temperaturbereich | -10-50 °C |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.





