Images are examples, some edited with AI. The technical data are authoritative. AI notice

Service unit filter regulator-lubricator, G1/4, 0.5-10 bar, with gauge, automatic drain NO - Airtec FROK-14-10-5-1321

Airtec ✓ Original product Brand new

Two-part service unit with filter regulator and lubricator, Airtec K series, G1/4 port, 0.5-10 bar regulating range. Flow up to 750 Nl/min, automatic drain NO, with pressure gauge. Inlet pressure 1.5 to 16 bar, oil and condensate bowls made of PC.

Net
€144.43
excl. VAT
Item AIR-FROK-14-10-5-1321
Manufacturer no. FROK-14-10-5-1321
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The Airtec FROK-14-10-5-1321 prepares compressed air in three steps: filtering, regulating and lubricating. The filter regulator removes particles and condensate with a 5 µm filter and holds the outlet pressure within 0.5-10 bar. The downstream lubricator adds oil to the air stream from a flow of 28 Nl/min.

Benefits

  • Three stages in one assembly: 5 µm filter, pressure regulator and lubricator.
  • Lubrication from 28 Nl/min: the lubricator responds even at low flow rates.
  • Automatic condensate drain empties the bowl without operator action.
  • Hazardous areas: no inherent potential ignition source with reference to Directive 2014/34/EU, usable in zones 1, 2, 21 and 22 subject to the local requirements.

Applications

Compressed air supply for cylinders, valves and pneumatic tools operated with lubricated air.

Technical data

FeatureValue
Typeservice unit, 2-part: filter regulator and lubricator
SeriesK
PortG1/4
Regulating range0.5-10 bar
Filtration5 µm
Flow750 Nl/min
Lubricator response threshold28 Nl/min
Inlet pressure1.5 to 16 bar
Oil and condensate bowlsPC
Condensate bowl volume16 cm³
Oil bowl volume35 cm³
Condensate drainautomatic, NO (open at 0 bar inlet pressure)
Pressure indicationwith pressure gauge
Flow directionleft to right
Handwheelstandard
Mounting positionvertical, drain valve at the bottom
Temperature range-10 to +60 °C
Mediumcompressed air to ISO 8573-1:2010, neutral gases
Bodyzinc die-cast
SealsNBR
Internal partsgalvanised steel, stainless steel, brass
ManufacturerAirtec
Hersteller-NrFROK-14-10-5-1321
GPSR HerstellerdatenAIRTEC Pneumatic GmbH, Westerbachstraße 7, DE-61476 Kronberg, www.airtec.de
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
Ausführungmit Manometer, Durchfluss von links nach rechts
BehälterausführungPC
AnschlussgrößeG1/4
ThreadG 1/4
Housing materialDie-cast zinc
Flow rate [l/min]750
Druckregelbereich [bar]0,5 - 10
DichtungenNBR
Betriebsdruck max [bar]16
Temperaturbereich-10-60 °C

Downloads

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

Customers Who Bought This Item Also Bought