Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 5/2-way monostable, valve size 18 mm, G1/4 VUVG-L18-M52-MT-G14-1H2L-W1 - Festo 578824
Switches double-acting cylinders and actuators with 1300 l/min standard nominal flow at only 18 mm valve size. Valve function 5/2-way monostable, operating pressure 3 to 8 bar, working ports G1/4, coil 24 V DC with 1.0 W. Internal pilot air, manual override detenting, non-detenting, concealed.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Valve function 5/2-way monostable at 18 mm valve size: the Festo solenoid valve VUVG-L18-M52-MT-G14-1H2L-W1 controls double-acting cylinders and actuators. As a monostable 5/2-way valve it controls both chambers of a double-acting cylinder and drops back to its normal position on loss of signal.
Benefits
- Standard nominal flow rate 1300 l/min at 18 mm valve size, nominal size 6.9 mm
- Operating pressure 3 to 8 bar
- Short switching times: 10 ms on, 45 ms off
- Coil 24 V DC with 1.0 W, 100 % duty cycle
- Working ports G1/4
- Cleanroom suitable: class 5 to ISO 14644-1
Applications
The operating medium is compressed air to ISO 8573-1:2010 [7:4:4], lubricated operation is possible and then required permanently. Permissible media and ambient temperature of the VUVG-L18-M52-MT-G14-1H2L-W1: -5 to 60 °C, the mounting position is freely selectable. Mounting of the VUVG-L18-M52-MT-G14-1H2L-W1: on manifold rail, with through-hole, electrical connection 2-pin, plug pattern H, horizontal connection, cable with open end.
Technical data
| Feature | Value |
|---|---|
| Type | VUVG-L18-M52-MT-G14-1H2L-W1 |
| Festo part number | 578824 |
| Series | VUVG |
| Valve function | 5/2-way monostable |
| Type of actuation | Electrical |
| Valve size | 18 mm |
| Standard nominal flow rate | 1300 l/min |
| Pneumatic working port | G1/4 |
| Operating voltage | 24 V DC |
| Operating pressure | 3 to 8 bar |
| Design | Piston spool |
| Type of reset | Mechanical spring |
| Approval | RCM mark, c UL us - Recognized (OL) |
| CE marking (see declaration of conformity) | To EU EMC Directive, to EU Low Voltage Directive, to EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS regulations, to UK electrical equipment regulations |
| Degree of protection | IP40, with plug socket |
| Nominal size | 6.9 mm |
| Exhaust air function | Can be throttled |
| Sealing principle | Soft |
| Mounting position | Any |
| Manual override | Detenting, non-detenting, concealed |
| Type of piloting | Piloted |
| Pilot air supply | Internal |
| Overlap | Indeterminate overlap |
| Pilot pressure | 3 to 8 bar |
| Switching time off | 45 ms |
| Switching time on | 10 ms |
| Duty cycle | 100 % |
| Maximum positive test pulse at 0 signal | 700 µs |
| Maximum negative test pulse at 1 signal | 900 µs |
| Coil characteristics | 24 V DC: 1.0 W |
| Permissible voltage fluctuation | ±10 % |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (then required for further operation) |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Ambient and media temperature restriction | -5 to 50 °C, without holding current reduction |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| PWIS conformity (LABS) | VDMA24364-B1/B2-L |
| Cleanroom suitability, measured to ISO 14644-14 | Class 5 to ISO 14644-1 |
| Medium temperature | -5 to 60 °C |
| Ambient temperature | -5 to 60 °C |
| Electrical connection | 2-pin, plug pattern H, horizontal connection, cable with open end |
| Type of mounting | On manifold rail, with through-hole |
| Pneumatic port 1 | G1/4 |
| Pneumatic port 2 | G1/4 |
| Pneumatic port 4 | G1/4 |
| Pneumatic port 5 | G1/4 |
| Note on materials | RoHS compliant |
| Seal material | HNBR, NBR |
| Housing material | Wrought aluminium alloy |
| Weight | 0.16 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VUVG-L18-M52-MT-G14-1H2L-W1 |
| EAN | 4052568385095 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 1/4 |
| Nominal size DN [mm] | 6,9 |
| Medium | Compressed air |
| Function | 5/2 monostable |
| Flow rate [l/min] | 1300 |
| Actuation type | Electrical |
| Medientemperatur [°C] | -5 bis 60 |
| Betriebsdruck max [bar] | 8 |
| Pneumatic connection | G1/4 |
| Protection rating | IP40 |
| Temperaturbereich | -5-60 °C |
| Temperature (max.) | 60 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







