Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 5/3 pressurised centre, 10 mm, M7 VUVG-L10-P53U-ZT-M7-1H2L-F1A - Festo 8164363
VUVG solenoid valve with valve function 5/3 pressurised centre: 290 l/min standard nominal flow, operating pressure -0.9 to 10 bar. Port M7, valve size 10 mm, 24 V DC coil with 0.8 W.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The solenoid valve VUVG-L10-P53U-ZT-M7-1H2L-F1A applies pressure to ports 2 and 4 in the mid-position, working as a 5/3-way valve. Standard nominal flow is 290 l/min at a valve size of 10 mm.
Benefits
- Flow and switching time: 290 l/min at valve size 10 mm, switches on in 14 ms and off in 36 ms.
- Pressure range: -0.9 to 10 bar, suitable for vacuum.
- Protection: Degree of protection IP40, ambient -5 to 50 °C.
- Cleanroom: Class 5 to ISO 14644-1.
- Coil: 24 V DC: 0.8 W, duty cycle 100 %.
Application
The VUVG-L10-P53U-ZT-M7-1H2L-F1A pressurises both cylinder chambers in the mid-position. External pilot air, pilot pressure 3 to 8 bar. Manual override detenting, non-detenting, concealed. Mounting on manifold rail, with through-hole, product weight 55 g. The medium is compressed air to ISO 8573-1:2010 [7:4:4]. Media temperature -5 to 50 °C, ambient -5 to 50 °C. Oiled air is possible, but then permanently. Suitable for battery production (F1a, low Cu/Zn/Ni).
Technical data
| Type | VUVG-L10-P53U-ZT-M7-1H2L-F1A |
|---|---|
| Festo part number | 8164363 |
| Valve function | 5/3-way, mid-position pressurised |
| Type of actuation | Electrical |
| Valve size | 10 mm |
| Standard nominal flow rate (to DIN 1343) | 290 l/min |
| Pneumatic working port | M7 |
| Operating voltage | 24 V DC |
| Operating pressure | -0.9 to 10 bar |
| Design | Piston spool |
| Type of reset | Mechanical spring |
| Approval | RCM Mark, c UL us - Recognized (OL) |
| Certificate issuing authority | UL MH19482 |
| Degree of protection | IP40 |
| Nominal size | 3.5 mm |
| Exhaust-air function | Can be throttled |
| Sealing principle | Soft |
| Mounting position | Any |
| Manual override | Detenting, non-detenting, concealed |
| Type of piloting | Piloted |
| Pilot air supply | External |
| Overlap | Indeterminate overlap |
| Pilot pressure | 3 to 8 bar |
| Suitability for vacuum | Yes |
| Switching time off | 36 ms |
| Switching time on | 14 ms |
| Changeover time | 19 ms |
| Duty cycle | 100 % |
| Maximum positive test pulse with 0 signal | 700 µs |
| Maximum negative test pulse with 1 signal | 900 µs |
| Characteristic coil data | 24 V DC: 0.8 W |
| Permissible voltage fluctuations | +/- 10 % |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (then required for further operation) |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Restrictions for ambient and media temperature | -5 - 50 °C, without holding current reduction |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured to ISO 14644-14 | Class 5 to ISO 14644-1 |
| Storage temperature | -20 to 60 °C |
| Media temperature | -5 to 50 °C |
| Pilot medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Ambient temperature | -5 to 50 °C |
| Product weight | 55 g |
| Electrical connection | Plug |
| Type of mounting | On manifold rail, with through-hole |
| Pilot air port 12/14 | M3 |
| Pneumatic connection, port 1 | M7 |
| Pneumatic connection, port 2 | M7 |
| Pneumatic connection, port 3 | M7 |
| Pneumatic connection, port 4 | M7 |
| Pneumatic connection, port 5 | M7 |
| Note on materials | RoHS compliant |
| Material seals | HNBR, NBR |
| Material housing | Wrought aluminium alloy |
| Material screws | Coated steel |
| Weight | 0.055 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VUVG-L10-P53U-ZT-M7-1H2L-F1A |
| EAN | 4052568612238 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | M7 |
| Nominal size DN [mm] | 3,5 |
| Seal material | HNBR, NBR |
| Housing material | Aluminium |
| Medium | Compressed air |
| Function | 5/3 pressurised |
| Flow rate [l/min] | 290 |
| Actuation type | Electrical |
| Medientemperatur [°C] | -5 bis 50 |
| Series | VUVG |
| Betriebsdruck max [bar] | 10 |
| Pneumatic connection | M7 |
| Protection rating | IP40 |
| Temperature (max.) | 50 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







