Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 5/2-way, bistable, dominant, ISO 15407-1, width 26 mm VSVA-B-D52-ZH-A1-1R5L - Festo 534548
As a 5/2-way valve, bistable with dominant signal for sub-base size 26 mm to ISO 15407-1, the Festo VSVA-B-D52-ZH-A1-1R5L provides a nominal flow rate of 1100 l/min. Operating pressure -0.9 to 16 bar, 24 V DC coil with low-current phase 1.0 W, high-current phase 2.4 W, electrical connection 3-pin, M12x1, central plug, round design.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The Festo solenoid valve VSVA-B-D52-ZH-A1-1R5L from the VSVA series is a 5/2-way valve, bistable with dominant signal to ISO 15407-1 with 1100 l/min nominal flow.
Benefits
- Standardised hole pattern: Sub-base size 26 mm to ISO 15407-1, so the 5/2 valve can be replaced without changing the sub-base.
- Flow rate: 1100 l/min nominal flow to DIN 1343, 1100 l/min on individual sub-base, 1100 l/min pneumatically interlinked.
- Additional function: safety shut-off.
- Manual override: non-detenting.
- Coil: 24 V DC, low-current phase 1.0 W, high-current phase 2.4 W, duty cycle 100%.
- Electrical connection: 3-pin, M12x1, central plug, round design.
Application
If both signals are present at once, the dominant side takes over, so the switching position stays defined. The operating medium is compressed air to ISO 8573-1:2010 [7:4:4], permissible ambient temperature -5 to 50 °C, product weight 270 g.
Technical data
| Type | VSVA-B-D52-ZH-A1-1R5L |
|---|---|
| Festo part number | 534548 |
| Valve function | 5/2-way, bistable, dominant |
| Type of actuation | Electrical |
| Construction width | 26 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 1100 l/min |
| Pneumatic working port | Sub-base size 26 mm to ISO 15407-1 |
| Operating voltage | 24 V DC |
| Operating pressure | -0.9 to 16 bar |
| Design | Piston gate valve |
| Approval | RCM, c UL us - Recognised (Oil) |
| CE mark (see declaration of conformity) | To EU EMC Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions |
| Degree of protection | IP65, NEMA 4 |
| Nominal size | 9 mm |
| Grid dimension | 27 mm |
| Exhaust-air function | Can be throttled, Via throttle plate, Via individual sub-base |
| Sealing principle | Soft |
| Mounting position | Any |
| Conforms to standard | ISO 15407-1 |
| Manual override | Non-detenting |
| Type of piloting | Piloted |
| Pilot air supply | External |
| Flow direction | Any |
| Lap | Overlap |
| Reverse polarity protection | For all electrical connections |
| Additional functions | Safety shut-off |
| Signal status display | LED |
| Pilot pressure | 3 to 8 bar |
| Flow rate of valve | 1400 l/min |
| Flow rate of valve on individual sub-base | 1100 l/min |
| Flow rate of pneumatically interlinked valve | 1100 l/min |
| Switching time reversal (dominating) | 25 ms |
| Duty cycle | 100% |
| Max. positive test pulse with 0 signal | 400 µs |
| Max. negative test pulse with 1 signal | 100 µs |
| Nominal pick-up current per solenoid coil | 110 mA to 20 ms |
| Nominal current with current reduction | 30 mA after 20 ms |
| Characteristic coil data | 24 V DC: low-current phase 1.0 W, high-current phase 2.4 W |
| Permissible voltage fluctuations | +/-10% |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Media temperature | -5 to 50 °C |
| Relative air humidity | 0 - 90% |
| Protection against direct and indirect contact | PELV |
| Pilot medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Ambient temperature | -5 to 50 °C |
| Max. tightening torque for valve mounting | 1.8 to 2.2 Nm |
| Product weight | 270 g |
| Electrical connection | 3-pin, M12x1, Central plug, Round design |
| Type of mounting | On sub-base, Via through-hole and screw |
| Pilot air port 12/14 | Sub-base size 26 mm to ISO 15407-1 |
| Pilot exhaust port 82/84 | Ducted, Not ducted as per standard, Either: |
| Note on materials | RoHS compliant |
| Material seals | Fluoro rubber, HNBR, NBR |
| Material housing | Die-cast aluminium |
| Weight | 0.24 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VSVA-B-D52-ZH-A1-1R5L |
| EAN | 4052568168407 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Nominal size DN [mm] | 9 |
| Housing material | Die-cast aluminium |
| Medium | Compressed air |
| Function | 5/2 bistable-dominant |
| Flow rate [l/min] | 1100 |
| Actuation type | Electrical |
| Norm | DIN ISO 15407-1 |
| Series | VSVA |
| Betriebsdruck max [bar] | 16 |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.






