Pneufit C push-in adaptor manifold, R1/4, tube 6 mm / 8 mm - Norgren C01D30628

The Norgren C01D30628 push-in adaptor manifold screws in with its R1/4 thread and distributes compressed air to several push-in ports for 6 mm and 8 mm OD tubes. Key data of the C01D30628: tube outside diameter 6 mm / 8 mm, external thread R1/4, operating pressure -0.9 to 10 bar and temperature range -20 to 60 °C.

Benefits

• Releasable stainless steel grab ring: the C01D30628 grips nylon or polyurethane tube with 6 mm OD securely.
• Operating pressure -0.9 to 10 bar: the C01D30628 works with positive pressure and with vacuum down to -0.9 bar.
• Taper thread R1/4 with pre-applied thread sealant: the C01D30628 seals without additional tape.
• PBT body with nickel plated brass components: the C01D30628 resists corrosion and contamination.
• 14 mm hexagon: the C01D30628 is fitted with standard tools.

Applications

Typical locations for the C01D30628 are cylinders, valves and air preparation units in general industrial automation.

Compliance

According to Norgren, the C01D30628 is RoHS compliant.