Images are examples, some edited with AI. The technical data are authoritative. AI notice
Proportional directional control valve for continuous flow control, G3/8 VPWP-10-L-5-Q-10-E-G-EX1 - Festo 1552544
The VPWP-10-L-5-Q-10-E-G-EX1 proportional directional control valve converts an electrical setpoint signal into a continuously variable flow rate. Key data: port G3/8, operating pressure 0 to 10 bar, valve function 5/3-way proportional directional control valve, closed and operating voltage 24 V DC.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The VPWP-10-L-5-Q-10-E-G-EX1 proportional directional control valve converts an electrical setpoint signal into a continuously variable flow rate. Decisive for selection: port G3/8 and operating pressure 0 to 10 bar.
Benefits
- Operating pressure 0 to 10 bar
- Flow rate of 2000 l/min (standard nominal flow rate)
- Port thread G3/8
- Valve function 5/3-way proportional directional control valve, closed
- Nominal size 10 mm
- Operation at 24 V DC
Application
Typical applications are servo-pneumatic positioning, speed control and process control loops. The VPWP-10-L-5-Q-10-E-G-EX1 works with compressed air to ISO 8573-1:2010 [6:4:4].
Technical data
| Type | VPWP-10-L-5-Q-10-E-G-EX1 |
|---|---|
| Festo part number | 1552544 |
| Nominal size | 10 mm |
| Actuation type | electrical |
| Sealing principle | hard |
| Mounting position | any, Preferably horizontal (display elements facing upwards) If the valve is moved, it must be mounted at a right angle to the direction of movement |
| Design | piston spool, with integrated pressure sensors |
| Reset method | magnetic spring |
| Safety note | Safety position VPWP: if there is a problem with the control interface, the valve assumes the closed mid-position. |
| Pilot type | direct |
| Flow direction | non-reversible |
| Valve function | 5/3-way proportional directional control valve, closed |
| Status displays | LED yellow = PL (power load), LED green = power, Red LED = error |
| Operating pressure | 0 to 10 bar |
| Operating pressure positioning/Soft Stop | 4 to 8 bar |
| Nominal operating pressure | 6 bar |
| Standard nominal flow rate (to DIN 1343) | 2000 l/min |
| Nominal operating voltage DC | 24 V |
| Operating voltage range DC | 18 to 30 V |
| Load voltage range DC | 18 to 30 V |
| Max. load current, voltage output | 500 mA |
| Max. load current, digital output | 500 mA |
| Max. current consumption, valve drive | 1.2 A |
| Max. current consumption, logic | 0.15 A |
| Nominal load voltage DC | 24 V |
| Supply voltage, digital output | 24 V load voltage |
| Supply voltage, voltage output | 24 V load voltage |
| Approval | RCM mark |
| CE marking (see declaration of conformity) | to EU EMC Directive, To EU Explosion Protection Directive (ATEX), In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | to UK RoHS instructions |
| Explosion protection | Zone 2 (ATEX) |
| ATEX category gas | II 3G |
| Type of ignition protection gas | Ex nA IIC T5 X Gc |
| Ex ambient temperature | 0°C ≤ Ta ≤ +50°C |
| Operating medium | compressed air to ISO 8573-1:2010 [6:4:4] |
| Note on operating and pilot medium | lubricated operation not possible |
| Corrosion resistance class CRC | 1 - low corrosion stress |
| PWIS conformity | VDMA24364-B1/B2-L |
| Medium temperature | 0 to 50 °C |
| Degree of protection | IP65, In mounted state |
| Ambient temperature | 0 to 50 °C |
| Product weight | 1010 g |
| Pressure resolution | 0.01 bar |
| Linearity error FS | 1.5 % |
| Repeatability FS | 1 % |
| Design of 24 V voltage output | Reverse supply with no damage, No galvanic isolation, Protected against short circuits, Reverse supply with no damage |
| Design of digital output | to IEC 61131-2, positive logic (PNP), No galvanic isolation, Protected against short circuits, Reverse supply with no damage |
| Control interface | digital, CAN bus with Festo protocol, terminating resistor integrated |
| Electrical connection, fieldbus interface IN | Plug, M9, 5-pin |
| Electrical connection, fieldbus interface OUT | Socket, M9, 5-pin |
| Electrical connection, fieldbus interface | Socket, M8, 4-pin |
| Mounting type | with through-hole, with accessories |
| Colour of connections | Port 2: Blue, Port 4: Black |
| Pneumatic port 1 | G3/8 |
| Pneumatic port 2 | G3/8 |
| Pneumatic port 3 | G3/8 |
| Pneumatic port 4 | G3/8 |
| Pneumatic port 5 | G3/8 |
| Note on materials | RoHS-compliant |
| Cover material | PA, reinforced |
| Housing material | wrought aluminium alloy, anodised |
| Weight | 1.2 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VPWP-10-L-5-Q-10-E-G-EX1 |
| EAN | 4052568239350 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 3/8 |
| Nominal size DN [mm] | 10 |
| Medium | Compressed air |
| Flow rate [l/min] | 2000 |
| Operating voltage | 24 V DC |
| Betriebsdruck max [bar] | 10 |
| Protection rating | IP65 |
| Temperaturbereich | 0-50 °C |
| Temperature (max.) | 50 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.





