Images are examples, some edited with AI. The technical data are authoritative. AI notice
Proportional directional control valve VPWI-5-L-3-G18-B2-A4-D - Festo 8167810
Net
excl. VAT
€910.80
Item
FES-8167810
Manufacturer no.
VPWI-5-L-3-G18-B2-A4-D
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Technical data
| Type of actuation | Electrical |
|---|---|
| Sealing principle | Soft |
| Mounting position | Any |
| Design | Poppet valve with spring return |
| Type of reset | Mechanical spring |
| Dimensions (W x L x H) | 42.2 mm x 95.3 mm x 94.3 mm |
| Safety instructions | Fail-safe position VPWI, normally closed |
| Type of piloting | Direct |
| Flow direction | Non-reversible |
| Nominal size, supply | 5 mm |
| Nominal size, exhaust | 5 mm |
| Total leakage | 5 l/h |
| Display type | TFT colour |
| Display size | 1.77" |
| Display resolution | 128x160 pixels |
| Valve function | 3-way proportional directional control valve |
| Reverse polarity protection | For all electrical connections |
| Short circuit current rating | For all electrical connections |
| Max. cable length | 30 M |
| Setpoint value input | 4 - 20 mA |
| Input resistance | 0.3 kOhm |
| Signal range analogue output | 4 - 20 mA |
| Max. load resistance current output | 500 Ohm |
| Accuracy analogue output in ± %FS | 1 %FS |
| Operating pressure | 0 ... 2 bar |
| Inlet pressure 1 | 0 ... 6 bar |
| Input pressure 3 | -1 ... 0 bar |
| Burst pressure | 40 bar |
| C value | 2.1 l/sbar |
| Standard nominal flow rate (standardised to DIN 1343) | 490 l/min |
| Standard nominal flow rate 2-3 | 340 l/min |
| Limit frequency | 125 Hz |
| Switching time on | 8 ms |
| Switching time off | 8 ms |
| Hysteresis | 0.3 %FS |
| Temperature cooefficient | 0.02 %/K |
| Nominal operating voltage DC | 24 V |
| Operational voltage range DC | 21.6 ... 27.6 V |
| Nominal current | 0.17 A |
| Max. current consumption | 525 mA |
| Max. electrical power consumption | 14.5 W |
| Approval | RCM, c UL us - Listed (Oil) |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions |
| Certificate issuing authority | UL E322346 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4], Inert gas |
| Note on operating and pilot medium | Lubricated operation not possible |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Media temperature | 0 ... 50 °C |
| Degree of protection | IP65 |
| Pollution degree | 2 |
| Ambient temperature | 0 ... 50 °C |
| Storage temperature | -20 ... 70 °C |
| Climatic category | 3K3 according to EN 60721 |
| Relative air humidity | Non-condensing |
| Nominal altitude of use | < 3000 m NHN |
| Sound power level | 62.5 dB(A) |
| Sound power level at a distance of 1 m | 51.9 dB(A) |
| Instructions on use | The product is suitable for industrial purposes only. Measures to eliminate radio interference may be required in residential areas. |
| Product weight | 370 g |
| Repetition accuracy FS | 0.3 % |
| Electrical connection 1, function | Actual value output, Setpoint input, Power supply |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | M12x1, A-coded to EN 61076-2-101 |
| Electrical connection 1, number of connections/cores | 5 |
| Electrical connection 1, connection pattern | 00995383 |
| Electrical connection 1, tightening torque | 1.5 Nm |
| Type of mounting | Via through-hole for M4 screw, via DIN rail |
| Pneumatic connection, port 1 | G1/8 |
| Pneumatic connection, port 2 | G1/8 |
| Pneumatic connection, port 3 | G1/8 |
| Max. tightening torque for fitting | 8.5 Nm |
| Suitable for use with food | See supplementary material information |
| Note on materials | RoHS compliant |
| Material cover | Reinforced PA |
| Material seals | HNBR, PTFE |
| Material housing | Reinforced PA |
| Weight | 0.5 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VPWI-5-L-3-G18-B2-A4-D |
| EAN | 4052568636845 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
Customers Who Bought This Item Also Bought
Festo
Proportional directional control valve VPWS-6-B-6-PC15-7-V - Festo 8074538
Item FES-8074538
€295.38
Festo
Proportional directional control valve VPWI-5-L-3-G18-12-A4-D - Festo 8167814
Item FES-8167814
€910.80
