Weld neck flange, DN 200, PN 10, pipe 219.1 mm, DIN 2632 and EN 1092-1 (type 11), black steel

This weld neck flange carries the welded pipe run and creates a bolted joint that can be opened again. The data sheet gives a nominal size of DN 200. The stated figures are a pipe outside diameter of 219.1 mm and a flange outside diameter of 340 mm. This version is supplied with the version to DIN 2632 and EN 1092-1 (type 11) and 8 bolt holes.

Benefits

• Nominal size DN 200 at a nominal pressure of PN 10 to DIN 2632 and EN 1092-1 (type 11).
• Welding end of 219.1 mm outside diameter and 6.3 mm wall thickness.
• Flange outside diameter 340 mm on a bolt circle of 295 mm.
• 8 bolt holes of 22 mm diameter.
• Overall height 62 mm with a formed hub for the transition to the pipe.
• Material black steel for the choice by medium and surroundings.

Applications

In pipework the flange is welded onto a pipe of 219.1 mm outside diameter and drawn together with 8 bolts.

Standards and conformity

The dimensions are based on DIN 2632 and EN 1092-1 (type 11) in the type 11 design with a formed hub.