Weld neck flange, DN 100, PN 40, pipe 114.3 mm, DIN 2635 and EN 1092-1 (type 11), black steel

Once installed, the weld neck flange carries the welded pipe run and creates a bolted joint that can be opened again. This version is listed with a pipe outside diameter of 114.3 mm and a flange outside diameter of 235 mm. The stated figure is a nominal size of DN 100. The version is listed with the version to DIN 2635 and EN 1092-1 (type 11) and 8 bolt holes.

Benefits

• Nominal size DN 100 at a nominal pressure of PN 40 to DIN 2635 and EN 1092-1 (type 11).
• Welding end of 114.3 mm outside diameter and 3.6 mm wall thickness.
• Flange outside diameter 235 mm on a bolt circle of 190 mm.
• 8 bolt holes of 22 mm diameter.
• Overall height 65 mm with a formed hub for the transition to the pipe.
• Material black steel for the choice by medium and surroundings.

Applications

In plant that is opened often the DN 100 joint gives access to the line without touching the weld.

Standards and conformity

Dimensions and design follow DIN 2635 and EN 1092-1 (type 11) at a nominal pressure of PN 40.