Locking screw »value line«, M5, AF 8, nickel-plated brass - Riegler 115676
-
This Item:
€0.37
-
Closing cap, round Rp 1/2, i., Stainless steel 1.4408 - Riegler 118335
€2.31
-
Closing cap, Octagonal G 1 1/2, i., AF 52, Stainless steel 1.4408 - Riegler 119367
€9.54
Locking screw »value line«, M5, AF 8, Operating pressure max. 60 bar, Operating temperature max. 150 °C, nickel-plated brass For air, water, steam, oil, etc.
Technical data
| Max. operating pressure | 60 bar |
|---|---|
| Max. operating temperature | 150 °C |
| Thread | M5 AG |
| L1 | 7,0 mm |
| L2 | 4,0 mm |
| a/f | 8 mm |
| Series | value line |
Standards and origin
- Customs tariff number: 74122000
- Country of origin: IT
About Caps and Screw plugs
Locking screws and end caps close off unused ports on manifolds, valve blocks and fittings. That allows a plant to be built with spare ports without leaking at the open bore. Threads run from M5 up to G 2 at working pressures of 20 to 60 bar.
What matters when choosing
- The thread follows the port being closed. Parallel G threads are available from G 1/8 to G 2, plus tapered R threads in R 1/8 and R 1/4 and M5 for small bores.
- The thread standard determines where the joint seals. Parallel threads to DIN EN ISO 228-1 need a seal at the shoulder, tapered threads to ISO 7-1 seal in the thread itself.
- For the seal, NBR covers general service. FDA-compliant FPM is chosen where food contact or higher temperatures are involved.
- Material follows the surroundings. Brass CW614N and electroplated nickel-plated brass CW614N for normal use, stainless steel 1.4571 and 1.4404 for corrosive media and cleaning routines.
- Pressure and temperature limit the choice. Working pressure reaches 60 bar, maximum operating temperature is either 80 °C or 150 °C depending on the version.
Typical applications
- Closing unused outlets on compressed air manifolds and valve terminal base plates
- Blanking off ports on air preparation units and cylinders that will be used later
- Sealing test and measuring ports once a pressure test is finished
- Plugging spare ports on hydraulic and oil line blocks
- Securing ports in cleaning and food areas using the FDA-compliant FPM seal
The NonPlusUltra versions are made from stainless steel 1.4404 and sealed with FDA-compliant FPM, released for compressed air, neutral gases and liquids, oil and grease. The value line series is also part of the group, which holds 253 articles.
| Weight | 0.003000 |
|---|---|
| Manufacturer | Riegler |
| Hersteller-Nr | 252.90/N-E |
| EAN | 4047322184304 |
| Zolltarifnummer | 74122000 |
| GPSR Herstellerdaten | Riegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Country of Manufacture | Italy |
| Thread | M5 AG |
| Norm | DIN EN ISO 228-1 |
| Series | value line |
| Betriebsdruck max [bar] | 60.000000 |
| Pneumatic connection | M5 AG |
| Temperature (max.) | 150 |








