Sealing cap, with 60° cone, thread G 1/4", PN 575 bar, zinc plated steel

During pressure tests and conversions the sealing cap closes the open side of the line. The material used is zinc plated steel. The thread G 1/4" accepts the mating part. The nominal pressure is 575 bar.

Benefits

• The closure withstands the full operating pressure and can be opened again with 1 wrench.
• 1 component closes the port completely, an additional cap is not required.
• Steel takes the tightening torque on the G 1/4" thread without permanent deformation.
• The nominal pressure of 575 bar defines the load limit of the joint.

Applications

Closing of open outlets, pressure tests, conversions and repairs on lines. The zinc plated steel suits hydraulic and compressed air lines in mechanical engineering.