Sealing cap, with 60° cone, thread G 1/2", PN 300 bar, zinc plated steel

The sealing cap closes an unused port in a pressure tight manner. Zinc plated steel determines the load capacity and the corrosion behaviour. The joint is created via the thread G 1/2". The nominal pressure is stated as 300 bar.

Benefits

• Steel takes the tightening torque on the G 1/2" thread without permanent deformation.
• The nominal pressure of 300 bar defines the load limit of the joint.
• The thread G 1/2" fits the existing port without an adapter.
• The closure withstands the full operating pressure and can be opened again with 1 wrench.
• 1 component closes the port completely, an additional cap is not required.

Applications

Closing of open outlets, pressure tests, conversions and repairs on lines. The zinc plated steel suits hydraulic and compressed air lines in mechanical engineering.