Valve terminal for bus module, 16 x 5/2-way single solenoid, M7 top ports on the valves, 24 V DC - E.MC

Where 16 double-acting cylinders or grippers are switched from one point, this terminal replaces 16 individual valves and their supply tubing. The terminal is prepared for a bus module, which is not included in the delivery. Each station delivers around 330 l/min through its M7 ports.

Advantages

• Response time of 15 ms or less at 5 bar and up to 5 switching cycles per second per valve.
• Only 0.8 W per solenoid at 24 V DC ±10 %, so 16 valves draw 12.8 W in total.
• Service life of at least 40 million cycles, valves with LED status indicator, each replaceable from above.
• M7 ports with a nominal cross-section of 7 mm² (Cv 0.39), around 330 l/min flow per station.
• Base with 16 stations without bus module, the matching module for PROFINET, EtherCAT, EtherNet/IP, DeviceNet, CC-Link, PROFIBUS DP or IO-Link is fitted separately.

Applications

• Building a valve manifold whose bus module is already on hand or ordered to match the controller.
• Packaging and feeding systems in which 16 actuators are switched from one central manifold.
• Medium-bore cylinders that move briskly with 330 l/min per station.
• Cabinet or machine mounting with easily accessible tube connections on top of each valve.

Conversion and extension

The valves can be swapped for individually available valves with one or two solenoids or for blanking plates. Stations are counted from the electrical connection.