S1V series valve terminal, 12 x 5/2-way single solenoid, M5 side ports, EtherNet/IP - E.MC

With 12 stations, this terminal runs a complete handling station over a single bus line. The integrated EtherNet/IP module takes switching commands straight from the controller, and every station carries a single-solenoid 5/2-way valve drawing 0.8 W. The M5 working ports are on the side of the base.

Advantages

• EtherNet/IP connection: 2x M12 socket, 4-pin, D-coded, bus module current below 120 mA
• Diagnostics: reports short circuit, open load, reverse polarity, under- and overvoltage, with a configurable output state on bus failure
• Swap valves without touching the tubing: M5 ports sit in the base, the valve comes off from above
• 11.5 mm pitch: 12 valve positions in a small footprint, DIN rail or screw mounting
• Easy to reconfigure: every position takes a single or double solenoid valve, including 5/3 and 2x 3/2 functions

Applications

• Pneumatic grippers, rotary actuators and stoppers in assembly and test fixtures
• Decentralised valve manifold mounted on the machine and linked to the controller via EtherNet/IP instead of discrete wiring
• Installations with limited height where the tubing should leave sideways
• Driving small double-acting cylinders and compact slides whose air demand is well covered by about 230 l/min per station

Accessories and spare parts

Blanking plates for unused positions, individual valves in other functions, M5 push-in fittings, silencers and mounting screws are available separately. Matching M12 cables are available for the bus line and the power supply.