Images are examples, some edited with AI. The technical data are authoritative. AI notice
Manifold sub-base VABX-A-S-EL-E12-APA-SHUH-XL - Festo 8189595
Net
excl. VAT
€67.18
Item
FES-8189595
Manufacturer no.
VABX-A-S-EL-E12-APA-SHUH-XL
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Technical data
| Size | 1 ... 2 |
|---|---|
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Position of connection | On the side |
| Reverse polarity protection | Yes |
| Diagnostics via LED | Diagnostics per module |
| Diagnostics per internal communication | Load supply undervoltage PL, Logic supply undervoltage PS |
| Valve terminal structure | Valve sizes can be mixed |
| Max. number of valve coils | 120 |
| Module parameters | Configuration of voltage monitoring load supply PL, Behaviour in error state |
| Compatible with | Valve terminal VTUX-A-S |
| Dimensions (W x L x H) | 35.2 mm x 117.2 mm x 56.1 mm |
| Fuse protection (short circuit) | Internal electronic fuse per channel |
| Inductive protective circuit | Integrated |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typical 27 mA |
| Intrinsic current consumption at nominal operating voltage load | Typical 13 mA |
| Note regarding operating voltage | SELV/PELV fixed power supplies required, Note the voltage drop |
| Power consumption at 24VDC | 0.65 W |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Nominal operating voltage DC of load | 24 V |
| Power failure bridging | 10 ms |
| Electrical isolation of outputs between channel - internal communication | Yes |
| Potential separation between the supply voltages electronics/sensor technology and load/valves | Yes |
| Protocol | AP |
| Pollution degree | 2 |
| Permissible voltage fluctuations for electronics/sensors | ±25% |
| Permissible voltage fluctuation of load | ±10% |
| Power supply, function | Incoming electronics/sensors and load |
| Power transmission, function | Outgoing electronics/sensors and load |
| Undervoltage load/valves (diagnostic message) | 21.1 V |
| Approval | RCM |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC, To UK RoHS instructions |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Storage temperature | -20 ... 70 °C |
| Relative air humidity | 5 - 95% |
| Protection against direct and indirect contact | PELV, Safety extra-low voltage |
| Degree of protection | IP65 |
| Overvoltage category | II |
| Ambient temperature | -5 ... 50 °C |
| Nominal altitude of use | <= 2000 m NHN |
| Max. installation height | 3500 m |
| Max. tightening torque wall mounting | 6 Nm |
| Product weight | 120.7 g |
| Electrical control | AP interface |
| Communication interface, protocol | AP |
| Mounting method for sub-base | With through-hole |
| Type of mounting | Via through-hole for M5 screw |
| Pneumatic connection, port 1 | For 15 mm cartridge |
| Pneumatic connection, port 5 | For 15 mm cartridge |
| Note on materials | RoHS compliant |
| Material sub-base | Reinforced PA |
| Material cover | Reinforced PBT |
| Material seals | NBR |
| Material sleeve | High-alloy stainless steel |
| Material clip | High-alloy stainless steel |
| Material nut | High-alloy stainless steel |
| Manufacturer | Festo |
| Hersteller-Nr | VABX-A-S-EL-E12-APA-SHUH-XL |
| EAN | 4052568648060 |
| Zolltarifnummer | 84819000 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
