Union nut for cutting ring, tube 35 L, stainless steel 1.4571

Once installed, the union nut presses the cutting ring onto the cone of the stud as it is tightened and so holds the tube in the coupling. The article is made of stainless steel 1.4571. The data give tube connection 35 L (M45x2). The version is listed with light series.

Benefits

• Matches tube 35 L (M45x2) of the light series, so the nut fits the cone of the matching stud.
• Available as a single part, so a damaged nut can be replaced without changing the whole coupling.
• For working pressures up to 160 bar in this size.
• Temperature range -60 to +400 °C, made of stainless steel 1.4571.
• The hexagon allows tightening with an ordinary open-ended spanner, no special tool is needed.

Applications

When building a tube run of the light series one nut per joint belongs to the cutting ring and the stud.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.