Tee fitting, thread NPT 1", PN 140 bar, zinc plated steel, branch for pipework

This tee fitting places an additional connection into an existing line. The material used is zinc plated steel. The thread NPT 1" accepts the mating part. The component is rated for 140 bar nominal pressure.

Benefits

• The thread NPT 1" fits the existing port without an adapter.
• 3 ports in one component replace two separate fittings and an intermediate line.
• The branch sits at 90° to the through axis and keeps the flow deflection short.
• Steel takes the tightening torque on the NPT 1" thread without permanent deformation.
• The nominal pressure of 140 bar defines the load limit of the joint.

Applications

Branches and measuring points, distribution to secondary runs, return lines. The zinc plated steel suits hydraulic and compressed air lines in mechanical engineering.