Tee fitting, thread NPT 1/8", PN 345 bar, zinc plated steel, branch for pipework

Where a branch is needed, the tee fitting takes over the distribution to the outlets. Zinc plated steel determines the load capacity and the corrosion behaviour. The joint is created via the thread NPT 1/8". The component is rated for 345 bar nominal pressure.

Benefits

• The nominal pressure of 345 bar defines the load limit of the joint.
• The thread NPT 1/8" fits the existing port without an adapter.
• 3 ports in one component replace two separate fittings and an intermediate line.
• The branch sits at 90° to the through axis and keeps the flow deflection short.
• Steel takes the tightening torque on the NPT 1/8" thread without permanent deformation.

Applications

Branches and measuring points, distribution to secondary runs, return lines. The zinc plated steel suits hydraulic and compressed air lines in mechanical engineering.