Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
The push-in fitting saves an intermediate construction because a tube of 18 mm outside diameter and a second tube of 18 mm outside diameter meet directly. Large design, tee design, tube diameter 18 mm.
Push-in fitting, tee design, large design, tube 18 mm, second port 18 mm, POM
FLUIDICS EQUIPMENT
Original product
Net price (excl. VAT)
€14.50
Item
FL-012148
Manufacturer no.
IQST 180
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.IQST 180
EAN4050571385910
Customs tariff number39174000
ConditionNew
Artikel
FL-012148
Frequently Bought Together
-
This Item:
€14.50
-
Adjustable cutting ring fitting, thread G 1/4", tube stud 8 S, stainless steel 1.4571
€57.62
-
Adjustable male stud elbow, G 3/8", tube 12 L, zinc-plated steel, no nut or ring
€15.55
Total price
The push-in fitting connects a tube of 18 mm outside diameter and a second tube of 18 mm outside diameter. The material is POM, the size is fixed at tube diameter 18 mm. The tee design sets a branch at right angles onto the main line.
Benefits
- With tube diameter 18 mm the size is fixed, so no reworking of the line is required
- One part serves two outlets and saves additional joints
- Approvals to NSF and ANSI 51 as well as 61, DVGW-W270, KTW are documented for the materials
- The tube is pushed in without tools and released again over the release ring
Technical data
| Material | POM |
|---|---|
| Tube outside diameter | 18 mm |
| Second tube outside diameter | 18 mm |
| Design version | large design |
| Seal material | NBR |
| Media | lubricated and unlubricated compressed air, neutral gases, cold water |
| Material approvals | NSF and ANSI 51 as well as 61, DVGW-W270, KTW |
Applications
Compressed air installation on machines and plants, pneumatic cylinders and valve terminals, control air lines inside the control cabinet, workshop distribution and service units.
Standards and conformity
The following approvals are documented for the materials used: NSF and ANSI 51 as well as 61, DVGW-W270, KTW.
| Weight | 0.046000 |
|---|---|
| Manufacturer | Fluidics equipment |
| Hersteller-Nr | IQST 180 |
| EAN | 4050571385910 |
| Zolltarifnummer | 39174000 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Customers Who Bought This Item Also Bought
