Push-in fitting 45° »Blue Series«, rotating, R 1/2 o. - Riegler 109255

Push-in fitting 45° »Blue Series«, rotating, R 1/2 o., for hose exterior Ø 6 mm, pmax short term 15 bar Push-in fittings series manufactured in plastic and nickel-plated brass. All parts are suitable for use with hoses, tubes or pipes made of plastic.

Standards and origin

• Customs tariff number: 39174000
• Country of origin: CN

About Male branch elbows 45°

A 45 degree push in fitting takes the tube away from the port at an angle, sitting between the straight outlet that needs a lot of space and the 90 degree elbow that bends the tube sharply. The group is released for compressed air up to 10 bar and accepts tube outside diameters of 4 to 12 mm.

What matters when choosing

• Thread: from M5 male through G 1/8 and G 1/4 male up to R 1/2 male. Parallel G threads and tapered R threads are both available within the group.
• For tube outside diameters of 4 to 12 mm. The outside diameter of the tube is what counts, and the recommended tube field names the matching version.
• Working pressure: 10 bar continuous, with a short term figure stated per article. Down to -0.95 bar is permitted, so vacuum duty is possible as well.
• Material: the series is built throughout as a combination of plastic and nickel plated brass. There is no all metal version within this group.
• Medium: compressed air is the released medium. Water, oil or chemically aggressive media call for a different series.

Typical applications

• Cylinder ports with little space where a straight outlet would foul
• Tube routing on moving axes without a tight kink
• Connecting valve terminals and manifolds inside a cabinet
• Blow off lines on packaging machinery
• Adding outlets to existing compressed air manifolds

Sealing is by NBR, the parts belong to the Blue Series and are produced in China. They are intended for use with plastic hose and plastic tube.