NS4 non-spill panel mount elbow coupling insert, 1/4" hose barb (6.4 mm), polypropylene, EPDM, gray - CPC NS4D43004

On the NS4D43004 the barb is set at an angle, so the 6.4 mm tube runs along the back of the panel instead of sticking straight out. The non-spill valve keeps each disconnect below 0.10 cc of loss and is rated for vacuum to 8.3 bar and 0 to 71 °C.

Applications

• Instruments with little depth behind the front panel
• Media lines where drips endanger staff or components
• Circuits running expensive fluids
• Systems with environmental rules on fluid escape

Benefits

• Saves depth: 1/4" elbow barb routes the tube sideways.
• Low-drip disconnect: under 0.10 cc per disconnect, 0.10 cc per connect.
• Resistant materials: polypropylene with a 316 stainless steel valve spring.
• Operating range: vacuum to 8.3 bar (120 psi), 0 to 71 °C.

Packing unit

Packing unit: 25 pcs. Price per piece, ordered in steps of 25 pcs.

Datasheet

The NS4 series datasheet is available under Downloads.