Everis LQ4 non-spill coupling insert, SAE-6 (3/8") male thread, chrome-plated brass, FKM, blue - CPC LQ4D46006BLUV

Apart from the FKM seal, this variant shares its body and SAE-6 thread with the blue insert LQ4D46006BLU. CPC specifies the base version for vacuum to 8.3 bar and less than 0.025 cc of fluid loss per disconnect at 0 psi.

Use in the data center

CPC offers EPDM and FKM as the standard Everis LQ4 seals to cover both glycol/water mixtures and dielectric coolants, so check which elastomer suits your fluid before installation. Threaded into the SAE port of a rack manifold or CDU, the insert receives the couplings on cold plate hoses and allows servers to be swapped without draining the loop. The blue marking sets this line apart from red ones.

Benefits

• FKM seal option: the second standard elastomer of the series, for loops where EPDM is not preferred.
• Pressure-rated disconnect: base version: under 0.055 cc spillage per disconnect at 120 psi.
• No stiction: seals carry no friction while connected, so separation stays clean after long service intervals.
• Low profile: sized for tight electronics enclosures.

Packing unit

Packing unit: 10 pcs. Price per piece, ordered in steps of 10 pcs.

Datasheet

The Everis LQ4 series datasheet is available under Downloads.