Everis LQ4 non-spill coupling insert, SAE-6 (3/8") male thread, chrome-plated brass, EPDM, blue - CPC LQ4D46006BLU

This SAE-6 threaded insert screws into a 3/8" SAE port and mates with the Everis LQ4 coupling bodies. When the pair is separated, the built-in valve shuts automatically, limiting spillage to under 0.025 cc per disconnect at 0 psi and under 0.055 cc at 120 psi.

Use in the data center

On rack manifolds and CDU outlets with SAE ports, the insert acts as the fixed connection point to which hoses from direct-to-chip cold plates are coupled. A server sled can therefore be detached during operation without draining the loop. Blue identifies one side of the circuit, while red parts from the same series mark the other.

Benefits

• Clean break under pressure: spillage stays below 0.055 cc per disconnect even at 8.3 bar.
• Double sealing when connected: redundant seals add a second barrier against leaks.
• Wide temperature window: rated from -17 to 115 °C with the EPDM seal.
• Orientation at a glance: the latch design makes alignment on the manifold easy to check.

Packing unit

Packing unit: 10 pcs. Price per piece, ordered in steps of 10 pcs.

Datasheet

The Everis LQ4 series datasheet is available under Downloads.