Standard pressure gauge Ø 63 mm, G 1/4 radial bottom, 0 to 10 bar, sheet steel case, type 117 - Riegler 101799

This standard gauge displays positive pressure from 0 to 10 bar purely mechanically via a bourdon tube, so it stays readable without power. Nominal size Ø 63 mm, G 1/4 connection radial bottom.

Why this gauge

• Accuracy class 1.6, equal to a permissible error of ±0.16 bar over the span
• Ø 63 mm with bottom radial connection, G 1/4 male thread
• Sheet steel case, plastic window
• Medium and ambient temperature -20 to 60 °C
• Scale graduation 0.5 bar for accurate reading across 0 to 10 bar

Specifications

Applications

Common measuring points: compressed air networks, air service units, regulators and compressors. Media must be compatible with copper alloy, not highly viscous and non-crystallising, gases and liquids are both possible. For good readability the usual working pressure should sit in the middle third of the scale, here roughly between 3.33 and 6.67 bar.