Standard pressure gauge Ø 100 mm, G 1/2 radial bottom, 0 to 6 bar, plastic case, type 146 - Riegler 101973

For compressed air networks the Ø 100 mm standard gauge gives a direct reading across 0 to 6 bar. It connects via G 1/2 radial bottom.

Why this gauge

• Ø 100 mm with bottom radial connection, G 1/2 male thread
• Plastic case, plastic window
• Red reference pointer to mark a set point or limit
• Medium and ambient temperature -20 to 60 °C
• Scale graduation 0.1 bar for accurate reading across 0 to 6 bar
• Accuracy class 1.6, equal to a permissible error of ±96 mbar over the span

Specifications

Applications

Typical locations are compressed air networks, air service units, regulators and compressors. Gases and liquids can be measured as long as they do not attack copper alloy, are not highly viscous and do not crystallise. For good readability the usual working pressure should sit in the middle third of the scale, here roughly between 2 and 4 bar.