Standard pressure gauge Ø 100 mm, G 1/2 radial bottom, 0 to 10 bar, plastic case, type 147 - Riegler 101974

With Ø 100 mm, G 1/2 connection radial bottom and a range of 0 to 10 bar, this bourdon tube gauge is a simple pressure display for compressed air networks.

Why this gauge

• Scale graduation 0.2 bar for accurate reading across 0 to 10 bar
• Accuracy class 1.6, equal to a permissible error of ±0.16 bar over the span
• Ø 100 mm with bottom radial connection, G 1/2 male thread
• Plastic case, plastic window
• Red reference pointer to mark a set point or limit
• Medium and ambient temperature -20 to 60 °C

Specifications

Typical use

It is typically used here: compressed air networks, air service units, regulators and compressors. Gases and liquids can be measured as long as they do not attack copper alloy, are not highly viscous and do not crystallise. For good readability the usual working pressure should sit in the middle third of the scale, here roughly between 3.33 and 6.67 bar.