Standard pressure gauge Ø 100 mm, G 1/2 radial bottom, 0 to 1.6 bar, plastic case, type 143 - Riegler 101970

For low-pressure circuits the Ø 100 mm standard gauge gives a direct reading across 0 to 1.6 bar. It connects via G 1/2 radial bottom.

Why this gauge

• Scale graduation 0.05 bar for accurate reading across 0 to 1.6 bar
• Accuracy class 1.6, equal to a permissible error of ±25.6 mbar over the span
• Ø 100 mm with bottom radial connection, G 1/2 male thread
• Plastic case, plastic window
• Red reference pointer to mark a set point or limit
• Medium and ambient temperature -20 to 60 °C

Applications

Typical locations are low-pressure circuits, regulators for low pressures and test set-ups. Media must be compatible with copper alloy, not highly viscous and non-crystallising, gases and liquids are both possible. For good readability the usual working pressure should sit in the middle third of the scale, here roughly between 0.53 and 1.07 bar.