Air service unit, G 2", 0.5-10 bar, with bowl guard, 3-part, semi-automatic drain

Once installed, the air service unit filters the compressed air, regulates it to the set pressure and adds oil. The article is listed with a pressure control range of 0.5 - 10 bar. This version is listed with a face-to-face length of 453 mm and an overall height of 477.0 mm. Material zinc die casting Z410 with NBR diaphragm and seals is listed for this version. Also stated are the G 2" port, a pore size of 60 µm and the with bowl guard.

Benefits

• Filter, relieving regulator and lubricator on the G 2" port.
• Pressure control range 0.5 - 10 bar at an inlet pressure of 1.5 - 16 bar.
• Flow rate 85 - 18500 l/min at a filter pore size of 60 µm.
• Oil reservoir 1700 cm³ and condensate volume up to 300 cm³.
• Lubricator response limit at 6 bar 85 l/min.
• Automatic venting when the secondary side is over pressure, oil can be topped up under pressure.

Applications

On presses and handling equipment the regulator keeps the pressure steady within 0.5 - 10 bar.