Filter regulator, G 3/8", 0.5 - 16 bar, 900 l/min, plastic with guard, drain semi-automatic

Once installed, the filter regulator cleans the compressed air by centrifugal action and keeps the set secondary pressure constant. Material zinc die casting Z410 is listed for this version. The data state a pressure control range of 0.5 - 16 bar. Also stated are a plastic bowl with guard and condensate drain semi-automatic.

Benefits

• Pressure control range 0.5 - 16 bar at an inlet pressure of 1.5 - 16 bar.
• Flow rate of 900 l/min through the port thread G 3/8".
• Sintered filter with a pore size of 5 µm and an additional centrifugal pre-separation stage.
• Condensate drain semi-automatic in the plastic bowl with guard for a condensate volume of up to 35 cm³.
• Relieving pressure regulator with secondary venting that bleeds off automatically at excess secondary pressure, gauge range 0 - 25 bar.

Technical data

Applications

In production with a high condensate load the version plastic bowl with guard works with the condensate drain semi-automatic.

Standards and conformity

The filter regulator counts as equipment without its own potential source of ignition in line with Directive 2014/34/EU.