Filter regulator, G 3/8", 0.5 - 10 bar, 900 l/min, plastic, drain semi-automatic

As a filter regulator the article cleans the compressed air by centrifugal action and keeps the set secondary pressure constant. The data state a pressure control range of 0.5 - 10 bar. This version is listed with port thread G 3/8", overall height 239 mm, dimension H1 100 mm, dimension L 54 mm and flow rate 900 l/min. Material zinc die casting Z410 is listed for this version. Also stated are a plastic bowl and condensate drain semi-automatic.

Benefits

• Pressure control range 0.5 - 10 bar at an inlet pressure of 1.5 - 16 bar.
• Flow rate of 900 l/min through the port thread G 3/8".
• Sintered filter with a pore size of 5 µm and an additional centrifugal pre-separation stage.
• Condensate drain semi-automatic in the plastic bowl for a condensate volume of up to 35 cm³.
• Relieving pressure regulator with secondary venting that bleeds off automatically at excess secondary pressure, gauge range 0 - 16 bar.

Technical data

Applications

In production with a high condensate load the version plastic bowl works with the condensate drain semi-automatic.

Standards and conformity

The filter regulator counts as equipment without its own potential source of ignition in line with Directive 2014/34/EU.