Compressed air filter G 3/8", 800 l/min, 5 µm, plastic bowl with cage, semi-automatic drain

Once installed, the compressed air filter separates condensate and particles from the compressed air by centrifugal action and a sintered element. The article is listed with a flow rate of 800 l/min. This version is listed with a port G 3/8", an overall height of 149 mm, a dimension H1 of 130 mm and a width of 48 (Ø 57) mm. Material zinc die casting Z410 is listed for this version. Also stated are plastic bowl with guard, condensate drain semi-automatic and pore size 5 µm.

Benefits

• Flow rate 800 l/min at the G 3/8" port.
• A pore size of 5 µm holds particles back from the compressed air.
• Inlet pressure 1.5 - 16 bar as per the data sheet.
• Condensate drain semi-automatic with a condensate volume of up to 35 cm³.
• Plastic bowl with guard at an overall height of 149 mm.
• Separation by centrifugal action, followed by the sintered element.

Applications

On machines with a G 3/8" port the filter holds back particles from 5 µm upwards and the condensate that forms.

Standards and conformity

The achievable air quality to ISO 8573-1 is stated as [6:4:4]. The equipment has no ignition source of its own, in line with Directive 2014/34/EU.