Compressed air filter G 1/2", 4000 l/min, 5 µm, plastic bowl with cage, semi-automatic drain

Once installed, the compressed air filter separates condensate and particles from the compressed air by centrifugal action and a sintered element. Material zinc die casting Z410 is listed for this version. The data state a flow rate of 4000 l/min. Also stated are plastic bowl with guard, condensate drain semi-automatic and pore size 5 µm.

Benefits

• Flow rate 4000 l/min at the G 1/2" port.
• A pore size of 5 µm holds particles back from the compressed air.
• Inlet pressure 1.5 - 16 bar as per the data sheet.
• Condensate drain semi-automatic with a condensate volume of up to 65 cm³.
• Plastic bowl with guard at an overall height of 194 mm.
• Separation by centrifugal action, followed by the sintered element.

Applications

In workshop networks with an inlet pressure of 1.5 - 16 bar the bowl collects up to 65 cm³ of condensate.

Standards and conformity

The achievable air quality to ISO 8573-1 is stated as [6:4:4]. The equipment has no ignition source of its own, in line with Directive 2014/34/EU.