Micro filter, G 3/8", 0 - 25 bar, zinc die casting Z410, metal bowl without sight glass, 88 (Ø 87)

The micro filter removes condensate and solids from the compressed air before it reaches the tool. The connection is made via thread G 3/8". The material used is zinc die casting Z410. The inlet pressure covers 0 - 25 bar. The temperature range extends over 0 to +90 °C.

Benefits

• Condensate capacity up to 22 cm³ between two drains
• Height 196 mm and length 88 (Ø 87) mm for installation planning
• Inlet pressure 0 - 25 bar as the leading rating of the device
• Connection thread G 3/8" for direct installation in the line
• Temperature range 0 to +90 °C for use in the workshop and in the plant
• Flow rate 2170 l/min without any appreciable pressure drop in the line

Technical data

Applications

Preparation of compressed air upstream of valves and cylinders, compressor stations, pipe networks and workshop supply.

Standards and conformity

The data sheets refer to ISO 8573-1. Further approvals are not documented and are therefore not stated.