Split pin DIN 94/ISO 1234, nominal diameter 8.0 mm, length 100 mm, zinc-plated steel

Once installed, the split pin secures bolts, shafts and castle nuts against loss by positive locking. It is produced from zinc-plated steel. The data give a nominal diameter of 8.0 mm and a length of 100 mm.

Benefits

• A nominal diameter of 8.0 mm to DIN 94 fits the standard split pin hole.
• A length of 100 mm determines how far the pin reaches through the bolt.
• Dimension A of at most 4.0 mm and dimension B of 16.0 mm follow DIN 94.
• Dimension C of at most 15.0 mm to DIN 94 limits the projection at the eye.
• Made of zinc-plated steel and removable again once the legs are bent back.

Applications

Ahead of castle nuts the 100 mm long pin passes through the hole and holds the nut in position.

Standards and conformity

Dimensions A, B and C of this size comply with DIN 94.