Split pin DIN 94/ISO 1234, nominal diameter 6.3 mm, length 40 mm, zinc-plated steel

In use, the split pin secures bolts, shafts and castle nuts against loss by positive locking. The data also state a length of 40 mm. Decisive for the selection is a nominal diameter of 6.3 mm.

Benefits

• A nominal diameter of 6.3 mm to DIN 94 fits the standard split pin hole.
• A length of 40 mm determines how far the pin reaches through the bolt.
• Dimension A of at most 4.0 mm and dimension B of 12.6 mm follow DIN 94.
• Dimension C of at most 11.8 mm to DIN 94 limits the projection at the eye.
• Made of zinc-plated steel and removable again once the legs are bent back.

Applications

On pin joints the split pin of 6.3 mm nominal diameter secures the bolt against axial movement.

Standards and conformity

Dimensions A, B and C of this size comply with DIN 94.