Twist drill bit DIN 338 type N, HSS-G, diameter 8.8 mm, overall length 125 mm

This type N twist drill to DIN 338 cuts right-hand and comes with a diameter of 8.8 mm. Documented are an overall length of 125 mm and a flute length of 81 mm. The grade HSS-G stands for a drill ground from solid stock in high-performance high-speed steel with increased concentricity.

Benefits

• Diameter 8.8 mm with diameter tolerance h8
• overall length 125 mm, of which 81 mm flute length
• 118 degree point angle, cross grinding from 3 mm upwards
• bright surface
• tapping drill for thread G 1/8"

Fields of application

The stated application is drilling in steel, alloyed and unalloyed cast steel below 900 N/mm² tensile strength, grey cast iron, malleable cast iron, spheroidal graphite cast iron, die casting, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze.

Standards

The dimensions are based on DIN 338, type N. The point thinning from 3 mm upwards follows the cross grind to DIN 1412 C.