Slotted spring pin DIN 1481 / ISO 8752, heavy duty, 6.0x40 mm, wall 1.20 mm, plain steel

This heavy duty spring pin to DIN 1481 and ISO 8752 springs from 6.4 mm down to the hole size of 6.0 mm as it is driven in and then holds itself. It is 40 mm long and has 1.20 mm wall thickness at 4.0 mm inside diameter. It is supplied in plain steel (black).

Benefits

• 0.4 mm of interference against the nominal size of 6.0 mm, the holding force is produced without a reamed hole
• wall thickness 1.20 mm to the heavy duty version of DIN 1481
• overall length 40 mm at 4.0 mm inside diameter before fitting
• outside diameter 6.4 mm before fitting, slotted and therefore springy
• plain spring steel, uncoated and therefore dimensionally true in the hole
• dimensions to DIN 1481 and ISO 8752, hence interchangeable across manufacturers

Applications

The pin is called for as a locating pin between two components, as a stop and as a safeguard against twisting.

Standards and conformity

The pin is made to DIN 1481 and ISO 8752 in the heavy duty version. The stated material is plain steel (black).