Slotted spring pin DIN 1481 / ISO 8752, heavy duty, 3.5x6 mm, wall 0.75 mm, stainless steel A2

The heavy duty version to DIN 1481 and ISO 8752 relies on 0.75 mm of wall thickness and so takes up transverse loads as well. Nominal size 3.5 mm, length 6 mm, outside diameter before fitting 4.0 mm. The pin is made from stainless steel A2.

Benefits

• 0.5 mm of interference against the nominal size of 3.5 mm, the holding force is produced without a reamed hole
• wall thickness 0.75 mm to the heavy duty version of DIN 1481
• overall length 6 mm at 2.3 mm inside diameter before fitting
• outside diameter 4.0 mm before fitting, slotted and therefore springy
• stainless steel A2 for damp surroundings and frequent cleaning
• dimensions to DIN 1481 and ISO 8752, hence interchangeable across manufacturers

Applications

It is fitted in conveyor technology and agricultural machinery to secure bolts and axles.

Standards and conformity

The pin is made to DIN 1481 and ISO 8752 in the heavy duty version. The stated material is stainless steel A2.