Slotted spring pin DIN 1481 / ISO 8752, heavy duty, 3.0x40 mm, wall 0.60 mm, stainless steel A2

Where parts are to be pinned without reaming the hole, the spring pin to DIN 1481 and ISO 8752 works with 3.0 mm nominal size and 40 mm length. The outside diameter before fitting is 3.3 mm, the wall thickness of the heavy duty version 0.60 mm. The material is stainless steel A2.

Benefits

• 0.3 mm of interference against the nominal size of 3.0 mm, the holding force is produced without a reamed hole
• wall thickness 0.60 mm to the heavy duty version of DIN 1481
• overall length 40 mm at 2.1 mm inside diameter before fitting
• outside diameter 3.3 mm before fitting, slotted and therefore springy
• stainless steel A2 for damp surroundings and frequent cleaning
• dimensions to DIN 1481 and ISO 8752, hence interchangeable across manufacturers

Applications

Its place is in mechanical engineering as a driving pin and as a connection between shaft and hub.

Standards and conformity

The pin is made to DIN 1481 and ISO 8752 in the heavy duty version. The stated material is stainless steel A2.