Slotted spring pin DIN 1481 / ISO 8752, heavy duty, 2.5x8 mm, wall 0.50 mm, plain steel

With 0.4 mm of interference against the nominal size of 2.5 mm, this pin to DIN 1481 and ISO 8752 sits firmly in the hole without a fit. The heavy duty version brings 0.50 mm of wall thickness, the overall length is 8 mm. The material is plain steel (black).

Benefits

• 0.4 mm of interference against the nominal size of 2.5 mm, the holding force is produced without a reamed hole
• wall thickness 0.50 mm to the heavy duty version of DIN 1481
• overall length 8 mm at 1.8 mm inside diameter before fitting
• outside diameter 2.9 mm before fitting, slotted and therefore springy
• plain spring steel, uncoated and therefore dimensionally true in the hole
• dimensions to DIN 1481 and ISO 8752, hence interchangeable across manufacturers

Applications

It is used in equipment and apparatus construction as a bearing pin for rollers, levers and springs.

Standards and conformity

The pin is made to DIN 1481 and ISO 8752 in the heavy duty version. The stated material is plain steel (black).